Scanmatik 2 Pro Tool (Basic Kit)

Suitable for use with PCMFlash Modules 53/71/77 and BitBox MGD1 Bench.

Scanmatik 2 PRO is a professional multibrand scanner designed for the diagnostics of electronic control systems of American, European, Japanese, and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

New features of Scanmatik 2 PRO:

• Galvanic isolation of the USB port (with power).
• Redesigned protection of K-lines and CAN buses on a new element base.
• Increased speed of work via Bluetooth by about 20%.
• Pulsed power supplies of the company's own design (no heating, wide input voltage range from 5 to 55V).
• Load-Dump power surge protection (when the generator is switched off on a running engine).

The widest support of J2534-1/2 standards:

• Supply of programming voltage (5-24V) to the OBD connector pins: 6, 8, 11, 12, 13, 14.
• AUX programming voltage output (via an additional cable).

For full support of peripheral units on GM (GDS2) and VAZ/Renault cars:

• An additional CAN bus on pins 12-13 running in 12H-13L or 12L-13H configuration.

Description:

The device works with a personal computer, tablet, or smartphone. The software for Windows and Android is included in the package.

When installing the driver (included) works with third-party software made for SAE J2534 and RP1210 standards. To connect to the adapter both USB and Bluetooth interfaces can be used (built into the Scanmatik 2 PRO adapter).

The kit includes the full current version of the program (all currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD, Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2.

It works with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

SM2-PRO Adapter Specifications:

• Interfaces for communication with PC (Tablet, Smartphone) - USB or Bluetooth.
• Power supply voltage: 5... 36V from the vehicle network or USB (galvanic isolation with power supply).
• Current consumption, not more than 350mA.
• Pulsed power supplies of the company's own design (no heating, wide input voltage range from 5 to 55V).
• Load-Dump power surge protection (when the generator is switched off onÿaÿrunning engine).
• Supported data buses:
  • 13 x ISO-9141/ISO-14230 (K-LINE)
  • 1 x J1850VPW
  • 1 x J1850PWM
  • 4 x CAN
  • 1 x Single Wire CAN
• Built-in multiplexer for switching diagnostic lines.
• The widest support of J2534-1/2 standards.
• Programming voltage supply (5-24V) to the OBD2 connector pins: 6, 8, 11, 12, 13, 14.
• AUX programming voltage output (via an additional cable).
• Bluetooth range, not less than: 10m (Class 2).
• Adapter dimensions (L x W x H), not more than: 97x75x22mm.
• Weight of the device in the basic configuration, not more than: 1 kg.

Included in the Kit:

• Scanmatik SM2-PRO interface
• 16 pin OBD2 cable
• 12V cigarette lighter power cable
• Carry case
• USB cable

*Above description direct from the manufacturer

 We do not sell PCMFlash or Bitbox, these can be sourced online.